|
|
2.10.8 [Measure Distance]
|
|
It measures a distance between two points on 3D.
| TOOL |
 |
When starting this command, the command which was starting before it is automatically ended.
A procedure is shown below.
1. It starts [Measure Distance] command.
2. It drags the left button of the mouse on three planes(XY, YZ, ZX).
TRACKER is displayed in first pushed point and present cursor location in the drag and a distance among it is displayed.
Drag - It is not in the movement limitation.
Mouse Limit Key (Generally :Ctrl ) + Drag - It limits a movement to the
vertical/horizontal/slant (45 degrees) direction.
When limiting input, continue to push Mouse Limit Key until the drag ends.
The TRACKER color is Yellow : The distance measurement point (Two).
3. Even if it ends drag, TRACKER is displayed. If necessary, drag TRACKER and move it to the optional position on 3D.
Drag - It is not in the movement limitation.
Mouse Limit Key (Generally :Ctrl ) + Drag - It limits a movement to the
vertical/horizontal/slant (45 degrees) direction.
When limiting input, continue to push Mouse Limit Key until the drag ends.
It is possible to return to the distance measurement initial state when
starting [Delete] command.
This command doesn’t end automatically. As for the way of ending, refer
to The way of command’s ending. As for the TRACKER, refer to The way of
the TRACKER operation. In [Environment] command, Mouse Limit Key can
be changed, too.
|
| |
| Copyright 2009 GLB Co., Ltd All Right Reserved |
|
