2.9.8[Section Deform[Ctl-P]] command

TOOL

When starting this command, the command which was starting before it is automatically ended.
A procedure is shown below.
1. It chooses the object (curved surface). (For the details, refer to P8 The way of choosing object.)
2. When the numerical input of the amount of variation with The specified Control point position is carried out It starts [Numeric Mode] command and it makes a numerical value input state.
The starting of [Numeric Mode] command can be omitted when starting a menu while pushing Numeric Mode Shortcut
Key(Generally : Shift ), too.
3. When displaying movement distance with the Control point position in the numerical value before movement
It starts P23 [Show The Number] command and it makes a numerical value display condition.
4. When Shape is reversed from the present setup
F5 key is pushed, and the [Shape] mode is taken. When effective, it can edit in the form at the time of generation.
5. When Shading is reversed from the present setup
F6 key is pushed, and the [Shading] mode is taken. Shading will be carried out by the solid of a perspective when effective.
6. When a solid is eliminated at the time of section edit
F7 key is pushed, and the [Object Erase] mode is taken.
7. When [Section Deform]command is done with [Passage Point]
F9 key is pushed, and the [Passage Point] mode is taken.
8. It starts [Section Deform[Ctl-P]] command.
9. TRACKER is displayed in the Control point line(Section) position.
TRACKER color : Dark Green : The section directional Control point line.
10. When Point Move is done with [1 axis Symmetry]
F7 key is pushed, and the [1 axis Symmetry] mode is taken.
11. When Point Move is done with [2 axis Symmetry]
F8 key is pushed, and the [2 axis Symmetry] mode is taken.
12. It clicks the left button according to TRACKER in the mouse cursor, it chooses a section.
Left button click - The choice of the Control point line.
Left button drag - The choice of the Control point line.
With the above key + Ctrl Point Add Key (Generally : Ctrl ), it is chosen in the addition by the selection control point
before it.
TRACKER color
Blue : The Control point of the curve point.
Dark Green : The Control point of the broken line point.
13. In case of [1 axis Symmetry] mode
Arbitrary one plane of three planes is chosen. An axis (green) is displayed on the selected plane.
14. In case of [2 axis Symmetry] mode
Arbitrary one plane of three planes is chosen. An axis (green) is displayed on the selected plane.
15. It clicks the left button according to TRACKER in the mouse cursor, it chooses Control Point. Left button click - The choice of the Control point. Left button drag - The choice of the Control point.
Line Mode Change Key (Generally :Shift ) + Left button click - The reverse of the curve point/broken line point and
the choice of the Control point
With the above key + Ctrl Point Add Key (Generally :Ctrl ), it is chosen in the addition by the selection control point
before it.
TRACKER color : Yellow : The choice Control point (The movement point).
16. In case of the numerical value input state


[Section Deform[Ctl-P]]Dialog Box
It clicks chosen TRACKER (Yellow). The [Section Deform[Ctl-P]] Dialog Box is displayed. It specifies movement distance.
17. In case of the mouse input state (except the numerical value input state) It drags chosen TRACKER (Yellow).
Drag - It is not in the movement limitation.
Mouse Limit Key (Generally :Ctrl ) + Drag - It limits a movement to the vertical/horizontal/slant (45 degrees) direction.
When limiting a movement, continue to push Mouse Limit Key until it specifies a Control point. In case of the numerical value display condition, it displays the displacement quantity of the movement origin Control point position and the mouse cursor location.
This command doesn’t end automatically. As for the way of ending, refer to P3 The way of command’s ending. As for
the TRACKER, refer to P8 The way of the TRACKER operation. In P91 [Environment] command, Line Mode Broken
Line/Change Key, Mouse Limit Key can be changed, too. When a thing except 0 is see to the Tension Coefficient, it has an influence on the thing except the moving Control point, too. For the details, refer to [Tension Coefficient] command.
Refer to [Control Point and Passage Point] about Passage Point.

Since Ver1.1
　　The range limitation function was made.
　The control point is made non-display by acquiring the center of the object automatically now and specifying the direction of side in the front side back of the direction seen from each axis.
This item of effective comes to display it by putting the check.
Moreover, the back and Front
Front : small direction
Back: Maximum direction
　　When setting it as follows. The control point on X preaxial side (Because it is the maximum value) becomes non-display.
　


In the control point movement, when the range is exceeded, it becomes non-display. (necesary more development. )